Contractor Power

This sealing collar and threaded ring combo bridge the gap between two 30A power cords to prevent water damage. Another 30A power cord with a weatherproof boot and ring will fit on the other side, keeping the connection safe from the elements.

*Please note that a heat gun or similar device will be required when using as a replacement on a power cord.

This threaded ring is compatible with most 30A RV and marine inlets. It fits over a weatherproof boot and screws over an inlet to provide maximum protection against the elements.

*Please note that a heat gun or similar device will be required when using as a replacement on a power cord.

This string light kit helps solve some common lighting issues encountered at a job site, camping, or other low-lit situations. It comes with two 25ft. long cables that have three outlets spaced evenly apart. It comes with 5 durable light cages that have convenient On/Off switches and hanging hooks that can be plugged into the outlets available in the cord. When not using the outlet, secure the protective cap to create a weather resistant seal. Use with other Conntek Loc-King products to extend the length or add additional accessories.

Box Includes:

• • 25ft. Plug€™n€™Glow cordset (x2)
• • Independent ON/OFF light cages with hanging hooks (x5)
• *Light bulbs are not included

Max power: 1875W

*Do  not exceed 100W on each light. Do no exceed 100ft in length, as it is de-rated to 1625W at that point.

Approval: ETL and Plug, SJTW: UL, C-UL

Limited one year warranty

Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of a home/business, and run the wiring to a transfer switch/box installation. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. These boxes are equipped with a SS2-50 (CS6365) male configuration for large systems.

We offer several different finishes of inlet boxes that are all corrosion resistant powder coated steel.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•A sealing collar for power cords that have a threaded ring to create a weather protected seal while in use.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 12,500W

Approval: Cordset & Inlet: UL, C-UL

Limited one year warranty

Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of your home / business, and run the wiring to a transfer switch / box installation. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. These boxes are equipped with a L14-30 male configuration rated for 30 amps, 125/250V.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•Sealing collar for cords with sealing boots and rings to create a weatherproof seal.

•Corrosion resistant powder coated steel finish on the box.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 7500W

Limited one year warranty

Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of your home/business, and run the wiring to a transfer switch/box installation. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. These boxes are equipped with a L5-30 male configuration for small to midsize systems.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•Sealing collar for cords with sealing boots and rings to create a weatherproof seal.

•Corrosion resistant powder coated steel finish on the box.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 3750W

Limited one year warranty

Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of a home/business, and run the wiring to a transfer switch/box installation. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. These boxes are equipped with a SS2-50 (CS6365) male configuration for large systems.

We offer several different finishes of inlet boxes that are all corrosion resistant powder coated steel.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•A sealing collar for power cords that have a threaded ring to create a weather protected seal while in use.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 12,500W

Approval: UL, C-UL

Limited one year warranty

Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of your home / business, and run the wiring to a transfer switch / box installation. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. These boxes are equipped with a L14-30 male configuration rated for 30 amps, 125/250V.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•Sealing collar for cords with sealing boots and rings to create a weatherproof seal.

•Corrosion resistant powder coated steel finish on the box.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 7500W

Limited one year warranty

Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of your home/business, and run the wiring to a transfer switch/box installation. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. These boxes are equipped with a L5-30 male configuration for small to midsize systems.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•Sealing collar for cords with sealing boots and rings to create a weatherproof seal.

•Corrosion resistant powder coated steel finish on the box.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 3750W

Limited one year warranty