Contractor Power

These plug adapters convert the locking 15A 125V NEMA L5-15 outlet and have a three prong US household NEMA 5-15/20 connector. Power household devices from a generator's 15A locking outlet using these adapters.

Limited one year warranty

These plug adapters convert the locking 15A 125V NEMA L5-15 outlet and have a three prong US household NEMA 5-15/20 connector. Power household devices from a generator's 15A locking outlet using these adapters.

Limited one year warranty

This adapter is commonly used to convert the 15A locking outlet on generators to a standard 15A household receptacle.

Limited one year warranty

These L5-20 power cords are frequently used to extend a generator's L5-20 outlet. They feature a bright yellow cable for easy visibility that remains flexible in cold temperatures.

Max Power: 2500W

Approval: Plug, STW, and Connector: UL, C-UL

Limited one year warranty

This 20A 125V NEMA L5-20 assembly plug is commonly used to wire an existing or new cord for a generator or other device using this configuration. It is constructed of an impact resistant nylon body and includes a gasket, compression ring, and tight screw.

Max grip Cable: OD ø17.5mm

Approval: UL, C-UL

Limited one year warranty

This generator Y-adapter cord converts the NEMA L5-20 outlet on a generator to two NEMA 5-15/20 connectors, allowing two devices with a three prong household plug to be plugged in at the same time.

Max power: 2500W

Limited one year warranty

This Y-adapter splits a generator's NEMA L5-20 outlet to allow two devices with a NEMA L5-20 plug to be connected at the same time. All ends are fully molded.

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This pigtail adapter can power up to three 15A devices with a standard 15A household plug from a locking 20A outlet typically found on a generator.

Approval: Plug, Connector, STW: UL, C-UL

Limited one year warranty

This pigtail adapter has a molded 20A, NEMA L5-20, male plug that is commonly found on generators. The T-slot design on the female connector accepts devices using a straight blade 15A (NEMA 5-15) or a 20A (NEMA 5-20) plug. The female connector also features a built-in power indicator light that illuminates when the power is connected.

Max Power: 2500W

Approval: Connector: UL, C-UL

Limited one year warranty

This adapter is useful in allowing a device with a L5-30 plug to connect to a L5-20 outlet. Please note there is no cover on the adapter, so it is not recommended that it be used in wet or damp conditions.

Limited one year warranty

This NEMA L5-20R locking connector can be used to wire on to a new cord or as a replacement for an existing cord. The black nylon body is impact resistant to withstand tough conditions. The gasket, compression ring, and tightening screws are all included.

Max Grip Cable: OD 17.5mm

Limited one year warranty

These 30 amp NEMA L5-30 locking assembly plugs can be used to wire a new cord or replace a plug with the same configuration. It comes in either a black or yellow nylon body with a rear cord clamp for easy wiring.

•Bladed Grab Cord Type

Max Grip Cable: OD ø16.5mm

Limited one year warranty

This generator adapter splits a L5-30 outlet into two standard household 5-15/20R receptacles. Both the male plug and the female connectors are fully molded, and the connectors have built-in neon lights that illuminate when the power is connected.

Maximum Wattage: 3750W

Limited one year warranty

This generator Y adapter splits a L5-30 outlet into two L5-20 connectors for plugging two devices in at the same time. All ends on the Y-adapter are fully molded.

Approval: Plug, Connector, and STOW: UL, C-UL

Limited one year warranty

This Y-adapter splits a L5-30 outlet into two L5-30 outlets, allowing two devices to be plugged in at the same time. The male plug and both female connectors are fully molded for maximum durability. The cable remains flexible in colder temperatures and provides heat resistance up to 221°F.

Max Power: 3750W

Limited one year warranty