Contractor Power

These plug adapters are typically used with generators, RV, and marine pedestals that require a L5-30 connection when only a NEMA 5-15 outlet is available. They can be used to provide minimal power for charging a boat or RV battery.

Limited one year warranty

Simply plug your existing 30 Amp locking cord into the female end of the adapter and plug into a 5-15 outlet to convert to 15 Amp.

•Threaded ring for increased weather resistance

•Compact plug adapter can be used in place of pigtail adapter

Max Wattage: 1875 Watts

Limited one year warranty

These power cords have an elbow style NEMA 5-15 flat plug and the outer jacket removed on the female side. These cords can be used as replacements for 15A household devices, such as air conditioners, microwaves, refrigerators, and other devices.

Approval: Plug, SPT-3: UL, C-UL

Limited one year warranty

Intended for a locking 50 Amp 125/250V AC cord to 15 Amp outlet; Simply plug your existing 50 Amp cord into the female end of the adapter and plug into any outlet to convert to 15 Amp.

•Threaded ring for increased weather resistance

•Compact plug adapter can be used in place of pigtail adapter

Max Wattage: 1875 Watts

Limited one year warranty

This 20 amp outdoor extension cord features a neon power indicator light on the T-Blade 5-15/20 female connector for easily testing for power. It can link a transfer switch to a small generator that has a 5-20 outlet or power other devices that need this plug.

More Lengths Available:

• •20520-050.......50ft

Limited one year warranty

This 20A NEMA 5-20 straight blade assembly plug comes in an impact resistant black nylon casing. This configuration is commonly used with refrigerators, microwaves, kitchen appliances, and for some EV charging equipment.

Max grip cable: OD ø9.3mm.

Approval: UL, C-UL

Limited one year warranty

This generator Y-adapter cord converts the NEMA 5-20 outlet into two NEMA 5-15/20 connectors, allowing two devices with a three prong household plug to be plugged in at the same time.

Max power: 2500W

Limited one year warranty

This plug adapter converts a straight blade 20A 125V NEMA 5-20 outlet to the locking style 20A 125V NEMA L5-20, commonly used with generators.

Approval: UL, C-UL

Limited one year warranty

This adapter is useful for adapting a 5-20 outlet, to a outlet that accepts a locking 30 amp plug. As a fully molded unit, it provides long lasting durability. This adapter is available in either a black or bright yellow color.

Limited one year warranty

This adapter is useful for adapting a 5-20 outlet, to a outlet that accepts a locking 30 amp plug. As a fully molded unit, it provides long lasting durability. This adapter is available in either a black or bright yellow color.

Limited one year warranty

This NEMA 6-15/20R female connector works with most standard household cords and can be used to wire a new or rewire an existing power cord. The T-Slot design allows plugs with a NEMA 6-15P or NEMA 6-20P male plug to connect to it.

•Straight bladed grab cord type

•Max grip Cable: OD ø9.3mm

Limited one year warranty

This fully molded 20 amp extension cord is designed for plugging in a 250 volt devices such as in-wall air conditioning units, EV chargers, and pool pumps.

Limited one year warranty

This adapter cord plugs into a 50A NEMA 6-50 outlet and allows a device with a NEMA L6-30 plug, to receive power.

Max Wattage: 7500 Watts

Limited one year warranty

This CS6364 assembly female connector can be used with large generators and construction cords that have a CS6365 plug/inlet. It is similar to the SS2-50R, but this connector includes the center guiding pin.

Approval: UL, C-UL

Limited one year warranty

This assembly male plug has the CS6365 configuration for temp power use. The plug is surrounded in a thin steel casing to easily fit into the outlet while also featuring a nylon body.

Approval: UL & C-UL Listed

Limited one year warranty