Contractor Power

This Y-adapter is designed for temp power to split a CS6364 or SS2-50 outlet, allowing two devices to be plugged in at the same time. It features two LED power indicator lights that illuminate when the power is connected.

Limited one year warranty

This 50 amp generator extension cord is built to power large industrial equipment and provide emergency power to homes. Easily connect multiple power distribution units at a trade show or temporary camping locations with this heavy duty cord. It fits most CS6364 generator transfer switches as well. The male plug is the CS6365 (SS2-50P), 50A California Standard locking style, while the female connector is the CS6364, 50A California Standard locking style with center guiding pin.

This cord has a 600V rated cable that remains flexible in cold weather and provides heat resistance up to 221°F.

Limited one year warranty

*Derated to 45 Amps when the cable is longer than 50ft

This 50A, 250V locking assembly plug has the CS8365 configuration. Use with generators, temp power, industrial settings, or anywhere this configuration style is needed.

Approval: UL, C-UL

Limited one year warranty

These dual 20W LED flood lights feature a tripod ready base for connecting a tripod to focus the light more precisely. The cast aluminum powder coated housing surrounding the lights is rainproof for usage in indoor and outdoor applications. Tempered safety glass lenses protect the light bulbs from damage. Operating cool and able to run for over 50,000 hours, these lights are ideal for contractors, mechanics, and home owners.

•IP54 Rainproof

•4800k CRI 76

•cETLus listed

Limited one year warranty

This adapter has (Ground Fault Circuit Interrupter) protection built in to the plug and a triple outlet connector for allowing up to three devices to be plugged in and protected. It is commonly used at job sites for worker and equipment safety in damp/wet conditions when a GFCI outlet is inaccessible.

Max power: 1875 Watts

Approval: Plug, SJTW, Connector: UL, C-UL

Limited one year warranty

GFCI (Ground Fault Circuit Interrupter) provides personal protection from ground faults and open neutral conditions for the job site, plant floor or workshop. GFCI is UL listed and meets OSHA specifications. When using a GFCI adapter for an outlet that is not protected, the adapter should always be placed nearest the outlet (GFCI then the extension cord).

This GFCI pigtail adapter has a NEMA 5-15 Loc-King plug and connector that can be used with other products in the series. The male plug has a Secure Twist Ring that easily fastens around the connector to keep the cords firmly attached, while the connector includes a protective cap to cover it when not in use. The bright green outer jacket helps this adapter stand out from other power cords.

Approval: Plug, SJTW: UL, C-UL

Limited one year warranty

This generator extension cord connects to a generator's outlet with a L14-20 configuration. Both the male plug and female connector are fully molded for durability. The bright yellow cable is heat resistant up to 221°F and will remain flexible in cold temperatures.

Max Power: 5000W

Approval: Plug, STW, and Connector: UL, C-UL

Limited one year warranty

*Derated to 15 Amps when the cable is longer than 50ft

This NEMA L14-20 assembly / replacement generator plug can be used as a replacement on an existing cord or for wiring on to a new cord needing this configuration style.

Max Grip Cable: OD: 18.5mm.

Approval: UL & C-UL

Limited one year warranty

This Y-adapter allows two devices using a standard household plug to be connected to the same NEMA L14-20 outlet, commonly found on generators. The unit is fully molded and the female connectors feature built-in neon lights that illuminate when receiving power.

Max Power: 5000W

Limited one year warranty

Power multiple devices from a generator with one of these 20A, L14-20 cords. They split a single 20A, 120/240V outlet into four 15/20A standard household outlets.

Max Power: 5000W

Approval: Plug, Connector, SJTW: UL, C-UL

Limited one year warranty

This pigtail adapter has a bright yellow cable color for easy visibility, while the L14-20 plug and L14-30 connector are both fully molded. It makes a great addition for a generator backup system powered from a L14-20 outlet.

Max power: 5000W

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This locking generator connector has the NEMA L14-20R configuration. Use for wiring as a replacement on to an existing cord or for creating a new one that needs this configuration.

Max Grip Cable: OD 16.5mm.

Limited one year warranty

This 30A generator extension cord has a threaded ring on the female connector to form a watertight seal around an inlet when securely screwed on. The male plug also has a threaded ring to connect an additional power cord or adapter. This cord is designed to work with the NEMA L14-30 Power Inlet Boxes.

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This assembly plug features a NEMA L14-30, 30A locking configuration and a black nylon body. It is a straight, bladed grab cord type.

Max Grip Cable: OD ø18.5mm

Approval: UL, C-UL

Limited one year warranty

This generator Y adapter splits the 30A connection into two 15/20A outlets. Both female connectors are clear blue and glow a bright orange color when the adapter is receiving power. The bright yellow jacket is heat resistant up to 221°F.

Max power: 7500W

Approval: Plug, Connector, and STOW: UL, C-UL

Limited one year warranty