Contractor Power

This generator Y adapter splits a L5-30 outlet into two L5-20 connectors for plugging two devices in at the same time. All ends on the Y-adapter are fully molded.

Approval: Plug, Connector, and STOW: UL, C-UL

Limited one year warranty

This Y-adapter splits a L5-30 outlet into two L5-30 outlets, allowing two devices to be plugged in at the same time. The male plug and both female connectors are fully molded for maximum durability. The cable remains flexible in colder temperatures and provides heat resistance up to 221°F.

Max Power: 3750W

Limited one year warranty

This adapter cord splits a single 3-prong 30A NEMA L5-30 outlet into 3 NEMA 5-15R outlets, allowing multiple devices to be plugged in.

Approval: Plug, Connector, STW: UL, C-UL

Limited one year warranty

This fully molded generator cord features a clear blue connector with a built-in neon light that glows when the power is connected. This power cord utilizes the 3-prong, L5-30 locking outlet commonly found on generators and splits it into three 15A standard household outlets for plugging multiple devices in at the same time.

Approval: Plug, SJTW: UL, C-UL

Limited one year warranty

This generator pigtail adapter plugs into a L5-30 outlet and allows a device with a L14-30 plug to receive power. It is commonly used to connect a power inlet box with a L14-30 configuration to a generator without having to rewire the setup. The single 125V hot wire from the L5-30 configuration is split to provide power to both hot wires needed for the L14-30. Both the male plug and female connector are fully molded on this adapter.

Max Power: 3750W

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This plug adapter converts a L5-30 outlet into a L5-20 outlet, allowing devices with that plug configuration to receive power. Since this adapter is not waterproof, it is not recommended to use in wet/damp locations.

Limited one year warranty

This locking 30A assembly connector comes in a black nylon body and features a 45 degree downward angle for strain relief. A threaded ring is included that securely fits around the inlet to create a watertight seal, helping to protect the connection from water damage.

Limited one year warranty

This 20A 250V rubber extension cord features a rubber jacket that remains flexible even in cold temperatures. The L6-20 connection is commonly found on in-rack power distribution units as well as with heavy-duty 250V equipment such as welders.

Approval: Plug, SJOOW: UL, C-UL

Limited one year warranty

This Y-adapter splits a NEMA L6-20 connection, allowing up to two devices with that configuration to be plugged in at the same time. The 3ft. of cable provide plenty of flexibility around the outlet when working with equipment. The NEMA L6-20 configuration is commonly found on in-rack power distribution units as well as with heavy-duty 250V equipment, such as welders.

Limited one year warranty