This 3-prong NEMA L6-20P male assembly plug is rated at 20A and 250V. It comes in a yellow nylon body and includes the gasket, compression ring, and tight screw needed for wiring.
Max Grip Cable: OD: 17.5mm.
Approval: UL & C-UL
Limited one year warranty
These power cords have an elbow style NEMA 5-15 flat plug and the outer jacket removed on the female side. These cords can be used as replacements for 15A household devices, such as air conditioners, microwaves, refrigerators, and other devices.
Approval: Plug, SPT-3: UL, C-UL
Limited one year warranty
These 30 amp NEMA L5-30 locking assembly plugs can be used to wire a new cord or replace a plug with the same configuration. It comes in either a black or yellow nylon body with a rear cord clamp for easy wiring.
•Bladed Grab Cord Type
Max Grip Cable: OD ø16.5mm
Limited one year warranty
This 50A RV/generator power cord can power large RVs that have the 50A locking style inlet, SS2-50. The male plug has a flat design that does not obstruct the RV pedestal cover from closing, while the female connector is the standard inline design.
Approval: Plug, STW: UL, C-UL
Limited one year warranty
This 3-prong NEMA L6-30P male assembly plug is rated at 30A and 250V. It is available in a yellow nylon body and includes the compression ring, gasket, and tight screw for easy wiring.
Max Grip Cable: OD: 17.5mm.
Approval: UL & C-UL
Limited one year warranty
This temporary generator power cord is solidly built with an attractive black finish. It features a NEMA 14-50 plug and a CS6364 connector with a guiding pin for use with most high-power generator and power distribution units (PDU). The cable provides heat resistance up to 221°F.
Approval: Plug, STW: UL, C-UL
Limited one year warranty
*Derated to 45 amps when the cable is longer than 50FT
This NEMA L14-20 assembly / replacement generator plug can be used as a replacement on an existing cord or for wiring on to a new cord needing this configuration style.
Max Grip Cable: OD: 18.5mm.
Approval: UL & C-UL
Limited one year warranty
This assembly plug features a NEMA L14-30, 30A locking configuration and a black nylon body. It is a straight, bladed grab cord type.
Max Grip Cable: OD ø18.5mm
Approval: UL, C-UL
Limited one year warranty
This 30 Amp RV power cord connects to a 30A locking style RV inlet. It features an easy grip handle with a built-in LED power indicator light. The female connector also has a LED power indicator light and is angled at 45 degrees for strain relief to provide better leverage when attempting to lock into the inlet. The outer jacket comes in a bright yellow color to stand out in various lighting conditions.
Max Wattage: 3750W
Approval: Plug, connector and STW: UL, C-UL
Limited one year warranty