Contractor Power

This fully molded 20 amp extension cord is designed for plugging in a 250 volt devices such as in-wall air conditioning units, EV chargers, and pool pumps.

Limited one year warranty

This adapter cord plugs into a 50A NEMA 6-50 outlet and allows a device with a NEMA L6-30 plug, to receive power.

Max Wattage: 7500 Watts

Limited one year warranty

This CS6364 assembly female connector can be used with large generators and construction cords that have a CS6365 plug/inlet. It is similar to the SS2-50R, but this connector includes the center guiding pin.

Approval: UL, C-UL

Limited one year warranty

This Y-adapter is designed for temp power to split a CS6364 or SS2-50 outlet, allowing two devices to be plugged in at the same time. It features two LED power indicator lights that illuminate when the power is connected.

Limited one year warranty

This 50 amp generator extension cord is built to power large industrial equipment and provide emergency power to homes. Easily connect multiple power distribution units at a trade show or temporary camping locations with this heavy duty cord. It fits most CS6364 generator transfer switches as well. The male plug is the CS6365 (SS2-50P), 50A California Standard locking style, while the female connector is the CS6364, 50A California Standard locking style with center guiding pin.

This cord has a 600V rated cable that remains flexible in cold weather and provides heat resistance up to 221°F.

Limited one year warranty

*Derated to 45 Amps when the cable is longer than 50ft

This adapter has (Ground Fault Circuit Interrupter) protection built in to the plug and a triple outlet connector for allowing up to three devices to be plugged in and protected. It is commonly used at job sites for worker and equipment safety in damp/wet conditions when a GFCI outlet is inaccessible.

Max power: 1875 Watts

Approval: Plug, SJTW, Connector: UL, C-UL

Limited one year warranty

GFCI (Ground Fault Circuit Interrupter) provides personal protection from ground faults and open neutral conditions for the job site, plant floor or workshop. GFCI is UL listed and meets OSHA specifications. When using a GFCI adapter for an outlet that is not protected, the adapter should always be placed nearest the outlet (GFCI then the extension cord).

This GFCI pigtail adapter has a NEMA 5-15 Loc-King plug and connector that can be used with other products in the series. The male plug has a Secure Twist Ring that easily fastens around the connector to keep the cords firmly attached, while the connector includes a protective cap to cover it when not in use. The bright green outer jacket helps this adapter stand out from other power cords.

Approval: Plug, SJTW: UL, C-UL

Limited one year warranty

This Y-adapter allows two devices using a standard household plug to be connected to the same NEMA L14-20 outlet, commonly found on generators. The unit is fully molded and the female connectors feature built-in neon lights that illuminate when receiving power.

Max Power: 5000W

Limited one year warranty

This 30A generator extension cord has a threaded ring on the female connector to form a watertight seal around an inlet when securely screwed on. The male plug also has a threaded ring to connect an additional power cord or adapter. This cord is designed to work with the NEMA L14-30 Power Inlet Boxes.

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty