Adapters

Avoid the costly setup of an EV charging station with this EV/Tesla adapter. It converts a NEMA 6-50 outlet that is commonly used for welders to a NEMA 14-50 female connector for plugging in an EV charging system.

This item is for EV USE ONLY, and must not be used with any other power system.

Max Power: 12500W

Limited one year warranty

This EV adapter has a NEMA L5-20P male plug and a NEMA 14-50R female connector. It is wired for EV chargers using a 14-50 plug to provide power when there is only an accessible L5-20 outlet, commonly found on generators.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

This EV pigtail adapter attaches to all EVSE chargers using a 14-50 plug to receive power from a generator outlet, industrial outlet, or other locking outlet with a L5-30 configuration.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

This adapter connects to all EV chargers with a 14-50 plug and connects to industrial outlets with a L6-30 configuration.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

This plug adapter is wired to be used with Tesla charging equipment with a 14-50 plug. It plugs into the standard 30 Amp RV outlet (TT-30), which is also found on some generators.

Limited one year warranty

This adapter plugs into a NEMA 14-50 outlet and has one NEMA 5-15/20 connector. The 50A straight blade connection can typically be found in RV parks, household EV charging outlets, and generators.

While a typical NEMA 14-50 outlet supplies 125/250V from two available hot wires, this adapter leaves one of them empty, allowing the NEMA 5-15/20 connection to receive the necessary 125V.

Limited one year warranty

This pigtail adapter has a NEMA 14-50 plug with a 45° downward angle for strain relief. The NEMA 6-15/20 connector is rated at 250V and is used with high powered devices such as air conditioners, EV chargers, or pool pumps.

Limited one year warranty

This pigtail adapter has a NEMA L14-20 plug, commonly used with generators, and a NEMA 6-15/20 connector for air conditioners, EV chargers, machines, and power tools.

Limited one year warranty

This generator pigtail adapter converts a L14-20 outlet commonly used with generators into a 3 prong L6-20 receptacle. It is typically used for adapting generator outlets to a connector that is used with industrial equipment such as welders.

Max Power: 5,000W

Approval: Plug, STW: UL, C-UL

Limited one year warranty