Generator Adapters

This generator pigtail adapter plugs into a L5-30 outlet and allows a device with a L14-30 plug to receive power. It is commonly used to connect a power inlet box with a L14-30 configuration to a generator without having to rewire the setup. The single 125V hot wire from the L5-30 configuration is split to provide power to both hot wires needed for the L14-30. Both the male plug and female connector are fully molded on this adapter.

Max Power: 3750W

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This plug adapter converts a L5-30 outlet into a L5-20 outlet, allowing devices with that plug configuration to receive power. Since this adapter is not waterproof, it is not recommended to use in wet/damp locations.

Limited one year warranty

This adapter cord can convert the L5-30 outlet, commonly found on generators, and allows  50 amp devices with a SS2-50 plug, such as a large RV or boat, to receive power.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

This Y-adapter splits a NEMA L6-20 connection, allowing up to two devices with that configuration to be plugged in at the same time. The 3ft. of cable provide plenty of flexibility around the outlet when working with equipment. The NEMA L6-20 configuration is commonly found on in-rack power distribution units as well as with heavy-duty 250V equipment, such as welders.

Limited one year warranty

This pigtail adapter is commonly used for generators or in industrial settings. It has a male L6-20P plug and a female L6-30R connector that are fully molded.

Approval: Plug, Connector, and SJTOW: UL, C-UL

Limited one year warranty

This Y-adapter splits a NEMA L6-30 outlet, commonly used EV chargers and welders, to two NEMA L6-20 connectors. The 3ft. of cable provide plenty of flexibility around the outlet when working with equipment. The NEMA L6-20 configuration is commonly found on in-rack power distribution units as well as with heavy-duty 250V equipment, such as welders.

Limited one year warranty

This Y-adapter allows two devices using a L6-30 connection to be plugged in one outlet. This configuration is popular with industrial equipment, in-rack power distribution units, heavy-duty 240V equipment, such as welders, as well as many electrical vehicle chargers. The outer jacket on the Y-adapter remains flexible in cold weather and provides heat resistance.

Max Power: 7500W

Approval: Plug, Connector, and STW 10/3 600V Heavy Duty Cable: UL, C-UL

Limited one year warranty

This adapter converts a CS6364 outlet that is commonly found on large generators or used with marine shore power to a 6-50 outlet that is commonly used for large welders.

Max Power: 12500W

This 30A pigtail adapter converts a TT-30 outlet, commonly found at RV parks and on generators, and allows a device with a L14-30 plug to receive power. It is ideal for powering a backup system with a L14-30 inlet box when only a TT-30 outlet is available on the generator. This adapter splits the single 125V hot wire from the TT-30 outlet to the two needed for the L14-30 connection.

Max Power: 3750W

Approval: STW, Connector: UL, C-UL

Limited one year warranty