Generator Wiring Devices

This 50A assembly connector comes in a black nylon body and features a 45 degree downward angle for strain relief. A threaded ring is included that securely fits around the inlet to create a watertight seal, helping to protect the connection from water damage.

Limited one year warranty

This 50A NEMA 14-50 assembly replacement plug is constructed of a durable black nylon body and comes in a 45° downward angle for strain relief. It is designed for use with STW 6/3 8/1 cable as well as STW 6/4 cable.

Limited one year warranty

This NEMA 5-15P, 15A assembly/replacement plug can easily be wired for many different devices such as fans, heaters, and radios that use this configuration.

• Plug Features:
• •Straight, clamp cord type

Max Grip Cable: OD ø9.3mm

Limited one year warranty

This CS6364 assembly female connector can be used with large generators and construction cords that have a CS6365 plug/inlet. It is similar to the SS2-50R, but this connector includes the center guiding pin.

Approval: UL, C-UL

Limited one year warranty

This locking 30A assembly connector comes in a black nylon body and features a 45 degree downward angle for strain relief. A threaded ring is included that securely fits around the inlet to create a watertight seal, helping to protect the connection from water damage.

Limited one year warranty

This 30A straight blade configuration style is commonly found on power cords for generators and is the standard for 30A service at RV parks. The assembly plug features a clamp grip for easy wiring, while the right angle provides strain relief to the cord, allowing the RV pedestal to fully close.

Limited one year warranty

This straight blade RV 30A assembly connector comes in a black nylon body and features a 45 degree downward angle for strain relief. A threaded ring is included that securely fits around the inlet to create a watertight seal, helping to protect the connection from water damage.

Limited one year warranty

This TT-30R replacement/assembly connector is typically used for RVs, generators, and other cords using this 30A connection. The 90° angle provides strain relief to help extend the life of the cord. Each model comes in a standard black nylon body and features a secure clamp that securely fastens over the cable.

Limited one year warranty

This 20A NEMA 5-20 straight blade assembly plug comes in an impact resistant black nylon casing. This configuration is commonly used with refrigerators, microwaves, kitchen appliances, and for some EV charging equipment.

Max grip cable: OD ø9.3mm.

Approval: UL, C-UL

Limited one year warranty

This NEMA 5-15/20R female connector works with most standard household cords and can be used to wire a new or rewire an existing power cord. The T-Slot design allows plugs with a NEMA 5-15P or NEMA 5-20P male plug to connect to it.

• Connector Features:
• •Straight bladed grab cord type

Max Grip Cable: OD ø9.3mm

Limited one year warranty

This NEMA 6-15/20R female connector works with most standard household cords and can be used to wire a new or rewire an existing power cord. The T-Slot design allows plugs with a NEMA 6-15P or NEMA 6-20P male plug to connect to it.

•Straight bladed grab cord type

•Max grip Cable: OD ø9.3mm

Limited one year warranty

This 20A 125V NEMA L5-20 assembly plug is commonly used to wire an existing or new cord for a generator or other device using this configuration. It is constructed of an impact resistant nylon body and includes a gasket, compression ring, and tight screw.

Max grip Cable: OD ø17.5mm

Approval: UL, C-UL

Limited one year warranty

This 3-prong NEMA L6-20P male assembly plug is rated at 20A and 250V. It comes in a yellow nylon body and includes the gasket, compression ring, and tight screw needed for wiring.

Max Grip Cable: OD: 17.5mm.

Approval: UL & C-UL

Limited one year warranty

These 30 amp NEMA L5-30 locking assembly plugs can be used to wire a new cord or replace a plug with the same configuration. It comes in either a black or yellow nylon body with a rear cord clamp for easy wiring.

•Bladed Grab Cord Type

Max Grip Cable: OD ø16.5mm

Limited one year warranty

This NEMA L14-20 assembly / replacement generator plug can be used as a replacement on an existing cord or for wiring on to a new cord needing this configuration style.

Max Grip Cable: OD: 18.5mm.

Approval: UL & C-UL

Limited one year warranty