Generator Power

This 30A TT-30R straight blade assembly/replacement connector can be attached to power cords that are commonly used with generators and RVs. It features a black nylon body and is a bladed grab cord type. The straight connector design allows it to connect directly to an inlet or other power cord.

Max Grip Cable: OD ø18.5mm

Limited one year warranty

This 30A assembly straight plug is designed for RVs and generators using this configuration. It has a standard inline design and is built with impact resistant nylon to withstand years of usage. The gasket, compression ring, and tight screw are all included.

Max Grip Cable: OD: 18.5mm

Limited one year warranty

This assembly male plug has the CS6365 configuration for temp power use. The plug is surrounded in a thin steel casing to easily fit into the outlet while also featuring a nylon body.

Approval: UL & C-UL Listed

Limited one year warranty

This power cord has a molded NEMA L21-20 plug and three outlet boxes evenly spaced throughout the cord. Each outlet box has four NEMA 5-15/20 standard three prong household receptacles.

•Twelve total NEMA 5-15/20 receptacles

Limited one year warranty

This plug adapter converts a L5-30 outlet into a L5-20 outlet, allowing devices with that plug configuration to receive power. Since this adapter is not waterproof, it is not recommended to use in wet/damp locations.

Limited one year warranty

This adapter is useful in allowing a device with a L5-30 plug to connect to a L5-20 outlet. Please note there is no cover on the adapter, so it is not recommended that it be used in wet or damp conditions.

Limited one year warranty

These plug adapters are typically used with generators, RV, and marine pedestals that require a L5-30 connection when only a NEMA 5-15 outlet is available. They can be used to provide minimal power for charging a boat or RV battery.

Limited one year warranty

This small plug adapter allows a device needing a L5-20 outlet to plug into a 15A standard household receptacle. It is made of a molded PVC body.

Limited one year warranty

These plug adapters convert the locking 15A 125V NEMA L5-15 outlet and have a three prong US household NEMA 5-15/20 connector. Power household devices from a generator's 15A locking outlet using these adapters.

Limited one year warranty

These plug adapters have a NEMA 5-15 plug and a L5-15 connector. They allow devices with the locking style 15A 125V plug to connect to the 15A standard household outlet.

Approval: UL, C-UL

Limited One Year Warranty

This locking power cord features a molded L5-20P plug. The equipment end has the removed outer jacket for easy hard wiring or attaching an assembly connector for a custom cord.

Approval: Plug, SJT: UL, C-UL

Limited one year warranty

These L15-30, 3 phase, extension cords are commonly used with industrial equipment and feature a bright yellow jacket for easy visibility. Both the male plug and female connector are fully molded.

Approval: Plug, Connector, and SJTW: UL, C-UL

Limited one year warranty

These 30 amp multi-outlet generator cord features four 15/20A (120V) 5-15/20R outlets. Each outlet has a protective cap to cover the outlets when not in use. It plugs into a generator's L14-30 outlet and provides power for running devices such as a fridge, portable a/c, lights, etc. during a storm.

Max Power: 7500W

Approval: Plug, Connector, and STW/SJTW: UL, C-UL

Limited one year warranty

These NEMA L15-20 generator extension cords have 4 prongs and are rated at 250V. Each cord comes in a bright yellow jacket for easy visibility.

Approval: Plug, Connector, and SJTW: UL, C-UL

Limited one year warranty

This 20 amp outdoor extension cord features a neon power indicator light on the T-Blade 5-15/20 female connector for easily testing for power. It can link a transfer switch to a small generator that has a 5-20 outlet or power other devices that need this plug.

More Lengths Available:

• •20520-050.......50ft

Limited one year warranty