Generator Power

This useful Y-adapter plugs into the RV standard 50A NEMA 14-50 outlet and splits the connection to allow a device with a TT-30 plug (such as a small to midsize RV) and another device with a 5-15 or 5-20 plug to also receive power. One of the common uses is for smaller RV's that wish to run higher power devices, such as an A/C or heating unit separately while also being able to enjoy more power from their RV.

Limited one year warranty

This 50A RV/generator power cord can power large RVs that have the 50A locking style inlet, SS2-50. The male plug has a flat design that does not obstruct the RV pedestal cover from closing, while the female connector is the standard inline design.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

This pigtail adapter plugs into a NEMA 14-50 outlet, commonly used with EV chargers, 50A RV outlets, and generators. The connector has a NEMA SS2-50R connector for plugging in a large boat, RV, or temp power cord.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

This pigtail adapter is commonly used at RV campgrounds as it allows a small to midsize camper with a L5-30 connection to receive power when only 50A service is available. This adapter is also useful for converting a backup generator's NEMA 14-50 outlet to the NEMA L5-30 configuration that a 30 amp power inlet box has. The female connector features a sealing ring that screws around the inlet to help protect the connection from water damage.

Approval: Plug, connector, and STW: UL, C-UL

Limited one year warranty

This pigtail adapter can be plugged into the straight blade 14-50 outlet found at RV parks, on generators, etc. and allow a device with a L14-30 plug or transfer switch to receive power.

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This temporary generator power cord is solidly built with an attractive black finish. It features a NEMA 14-50 plug and a CS6364 connector with a guiding pin for use with most high-power generator and power distribution units (PDU). The cable provides heat resistance up to 221°F.

Approval: Plug, STW: UL, C-UL

Limited one year warranty

*Derated to 45 amps when the cable is longer than 50FT

This temporary generator power cord is solidly built with an attractive black finish. It features a NEMA 14-50 inline plug and a CS6364 connector with a guiding pin for use with most high-power generator and power distribution units (PDU). The cable provides heat resistance up to 221°F.

Max power: 12,500W

*De-rated to 45 amps when cable is longer than 50ft.

Approval:Plug, STW: UL, C-UL

Limited one year warranty

This adapter plugs into a NEMA 14-50 outlet, which is common for stoves, generators, and RV camp sites. It allows devices with a 6-50 plug, such as a welder or compressor, to operate.

Max Power: 12500W

Limited one year warranty

Plug in your existing 6-15 or 6-20 Amp power cord into the female end of the adapter, allowing you to plug into a a 4-prong 50 Amp straight blade power source.

•Tabs on the adapter to aid in unplugging from an outlet

•Plugs in on a 90° angle

Max Wattage: 5000 Watts

Limited one year warranty

Plug in your existing 6-15 or 6-20 Amp power cord into the female end of the adapter, allowing you to plug into a a 4-prong 50 Amp straight blade power source.

•Tabs on the adapter to aid in unplugging from an outlet

Max Wattage: 5000 Watts

Limited one year warranty

This pigtail adapter has a NEMA 14-50 plug with a 45° downward angle for strain relief. The NEMA 6-15/20 connector is rated at 250V and is used with high powered devices such as air conditioners, EV chargers, or pool pumps.

Limited one year warranty

This pigtail adapter has a NEMA 14-50 plug and a NEMA 6-15/20 connector that is rated at 250V. This adapter is commonly used with high powered devices such as air conditioners, EV chargers, or pool pumps.

Limited one year warranty