Generator Power

This Y-adapter splits a generator's NEMA L5-20 outlet to allow two devices with a NEMA L5-20 plug to be connected at the same time. All ends are fully molded.

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This pigtail adapter can power up to three 15A devices with a standard 15A household plug from a locking 20A outlet typically found on a generator.

Approval: Plug, Connector, STW: UL, C-UL

Limited one year warranty

This pigtail adapter has a molded 20A, NEMA L5-20, male plug that is commonly found on generators. The T-slot design on the female connector accepts devices using a straight blade 15A (NEMA 5-15) or a 20A (NEMA 5-20) plug. The female connector also features a built-in power indicator light that illuminates when the power is connected.

Max Power: 2500W

Approval: Connector: UL, C-UL

Limited one year warranty

This generator pigtail adapter cord features an L5-20 assembly plug and molded L14-30 female connector. It splits the single 125V hot wire from the L5-20 connection to provide power to both needed for the L14-30 connection.

Max power: 2500W

Approval: Plug, STW, Connector: UL, C-UL

Limited one year warranty

This adapter is useful in allowing a device with a L5-30 plug to connect to a L5-20 outlet. Please note there is no cover on the adapter, so it is not recommended that it be used in wet or damp conditions.

Limited one year warranty

This locking power cord features a molded L5-20P plug. The equipment end has the removed outer jacket for easy hard wiring or attaching an assembly connector for a custom cord.

Approval: Plug, SJT: UL, C-UL

Limited one year warranty

Power inlet boxes run power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. Simply mount the box on the exterior of your home/business, and run the wiring to a transfer switch/box installation. When emergency power is needed, connect a generator cord to the inlet box, and flip the switch for the transfer unit. These boxes are equipped with a L5-30 male configuration for small to midsize systems.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•Sealing collar for cords with sealing boots and rings to create a weatherproof seal.

•Corrosion resistant powder coated steel finish on the box.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 3750W

Limited one year warranty

This generator adapter splits a L5-30 outlet into two standard household 5-15/20R receptacles. Both the male plug and the female connectors are fully molded, and the connectors have built-in neon lights that illuminate when the power is connected.

Maximum Wattage: 3750W

Limited one year warranty

This generator Y adapter splits a L5-30 outlet into two L5-20 connectors for plugging two devices in at the same time. All ends on the Y-adapter are fully molded.

Approval: Plug, Connector, and STOW: UL, C-UL

Limited one year warranty