Home & Office Power

This 20A 125V NEMA L5-20 assembly plug is commonly used to wire an existing or new cord for a generator or other device using this configuration. It is constructed of an impact resistant nylon body and includes a gasket, compression ring, and tight screw.

Max grip Cable: OD ø17.5mm

Approval: UL, C-UL

Limited one year warranty

This power cord features a 3-prong UK plug (BS1363 ) with 13A fuse and an IEC C19 connector. Power network devices such as routers, PDUs, UPS, blade server chasis, and more that require a C19 connection.

Approval: Plug: BSI; H05VV-F 1.5MMSQ 3G:European, Connector: UL, C-UL, CCC, PSE, VDE, GOST, BSI, SAA,KETI

Limited one year warranty

These NEMA 5-15 outlet extender cords have a length of 1.25ft. Use with large converter plugs to prevent overcrowding issues with power strips.

Approval: Plug, SVT, and Connector: UL, C-UL

Limited one year warranty

This power supply / replacement cord has a 20A NEMA 5-20 plug and the outer jacket removed on the equipment side. With the female side prepped for wiring, this power cord can be used as a replacement for devices such as air conditioning or heaters.

Limited one year warranty

This cord is designed for server and networking equipment. It has a NEMA 6-15 plug and IEC C19 connector that plugs into an IEC C20 inlet. The cable is 8ft. long to provide plenty of space away from the outlet.

Approval: Plug - SJT: UL, C-UL

Connector - UL, C-UL, CCC, PSE, VDE, GOST, BSI, SAA,KETI

Limited one year warranty

This 3-prong NEMA L6-20P male assembly plug is rated at 20A and 250V. It comes in a yellow nylon body and includes the gasket, compression ring, and tight screw needed for wiring.

Max Grip Cable: OD: 17.5mm.

Approval: UL & C-UL

Limited one year warranty

Use these 3 prong, NEMA 5-15, standard household space creator cords when larger converter plugs cover other outlets on a power strip. The Snap Pop Easy Release Tabs on both ends of the cord allows for easy unplugging simply by pushing down on the tab. They are available in a convenient 2 pack.

Approval: Plug, SVT, and Connector: UL, C-UL

Limited one year warranty

This power cord features a NEMA 7-20 plug and a removed outer jacket that allows this cord to be hard wired into devices, such as Packaged Terminal Air Conditioner (PTAC) units, or for adding an assembly female connector to create a power cord.

Approval: Plug, SJT: UL, C-UL

Limited one year warranty

These 30 amp NEMA L5-30 locking assembly plugs can be used to wire a new cord or replace a plug with the same configuration. It comes in either a black or yellow nylon body with a rear cord clamp for easy wiring.

•Bladed Grab Cord Type

Max Grip Cable: OD ø16.5mm

Limited one year warranty