This 30A assembly straight plug is designed for RVs and generators using this configuration. It has a standard inline design and is built with impact resistant nylon to withstand years of usage. The gasket, compression ring, and tight screw are all included.
Max Grip Cable: OD: 18.5mm
Limited one year warranty
This assembly male plug has the CS6365 configuration for temp power use. The plug is surrounded in a thin steel casing to easily fit into the outlet while also featuring a nylon body.
Approval: UL & C-UL Listed
Limited one year warranty
This 30A assembly combo replaces the L5-30R connector commonly found on RV or marine shore power cords. The weatherproof boot fits over the female assembly connector to create a tight seal, while the threaded ring screws around the inlet to prevent water damage from occurring at the connection. A gasket, compression ring, and tight screw are all included with the
Max Grip Cable: OD ø17.5mm
This power cord has a molded NEMA L21-20 plug and three outlet boxes evenly spaced throughout the cord. Each outlet box has four NEMA 5-15/20 standard three prong household receptacles.
•Twelve total NEMA 5-15/20 receptacles
Limited one year warranty
This hospital grade power strip has a metal enclosure that is impact, corrosion, and rust resistant while also having protection from fire damage. It features four 5-15 outlets for connecting multiple devices. The power strip also has 15A resettable overcurrent protection that automatically shuts the power off when the current exceeds the rating passed through the device or if it encounters a fault. Simply push the reset button after fixing the problem and it can be used again as before. The strain relief bushing prevents against cable displacement.
Approval: Meets UL1363A
Limited one year warranty
This power extension cord features a NEMA 5-15 molded elbow plug with a 90° downward angle. The female end has a NEMA 5-15/20 connector that accepts both NEMA 5-15P and NEMA 5-20P plugs.
Limited one year warranty