Conntek

This generator pigtail adapter cord plugs into a L5-30 outlet commonly found on generators and allows devices with a L14-20 plug to receive power. It splits the single 125V hot wire from the L5-30 to the two hot wires needed for the L14-20 connection.

Approval: Plug, STW, and connector: UL, C-UL

Max Power: 3750W

This generator pigtail adapter plugs into a L5-30 outlet and allows a device with a L14-30 plug to receive power. It is commonly used to connect a power inlet box with a L14-30 configuration to a generator without having to rewire the setup. The single 125V hot wire from the L5-30 configuration is split to provide power to both hot wires needed for the L14-30. Both the male plug and female connector are fully molded on this adapter.

Max Power: 3750W

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This plug adapter converts a L5-30 outlet into a L5-20 outlet, allowing devices with that plug configuration to receive power. Since this adapter is not waterproof, it is not recommended to use in wet/damp locations.

Limited one year warranty

This pigtail adapter connects to a 30 amp marine standard NEMA L5-30 outlet and connects to a boat using the older 50 amp 125V NEMA SS1-50 configuration style.

Approval: Plug and STOW: UL, C-UL

Limited one year warranty

This marine shore pigtail adapter cord has a L5-30P male plug that connects to the standard 30A marine receptacle and allows a larger boat with the newer locking 50A 125/250V SS2-50 connection to receive power.

It splits the single 125V hot wire from the L5-30 outlet for providing power to both wires needed for the SS2-50 connection. Both the male and female ends are fully molded.

Limited one year warranty

This adapter cord can convert the L5-30 outlet, commonly found on generators, and allows  50 amp devices with a SS2-50 plug, such as a large RV or boat, to receive power.

Approval: Plug, STW: UL, C-UL

Limited one year warranty