Marine Shore Power
5-15P Flanged Inlet(Black)
These 15A flanged inlets (NEMA 5-15P) feature a nylon casing and a weatherproof cap to protect the inlet when not being used. Easily wire a connection for RVs, boats, or equipment such as block heaters.
Approval: UL, C-UL
Limited one year warranty
5-15P Flanged Inlets (White)
These NEMA 5-15P 15A flanged inlets feature a nylon casing and a weatherproof cap to protect the inlet when not being used. Easily wire a connection for RVs, boats, or equipment such as block heaters.
Approval: UL, C-UL
Limited one year warranty
5-20P Flanged Inlets - Black
These 20A flanged inlets feature a nylon casing and a weatherproof cap when not being used. Easily wire a power source for RVs, boats, etc. using one of these inlets.
Approval: UL, C-UL
Limited one year warranty
5-20P Flanged Inlets - White
These 20A flanged inlets feature a nylon casing and a weatherproof cap when not being used. Easily wire a power source for RVs, boats, etc. using one of these inlets.
Approval: UL, C-UL
Limited one year warranty
Female Weatherproof Boot & Ring
This weatherproof boot and ring combo is designed to work with female locking connectors that are rated for 30 amps. The included threaded ring screws around an inlet or a sealing collar on a cord to prevent water damage at the connection.
Limited one year warranty
IEC 309 to ROJ Power Cord
This IEC 309 to ROJ power cord is rated at 32A 200~250V and is typically used for industrial purposes. The female end has the outer jacket removed for easily wiring an assembly connector or to hard wire into equipment.
Limited one year warranty
L5-30R Connector, Boot, & Ring
This 30A assembly combo replaces the L5-30R connector commonly found on RV or marine shore power cords. The weatherproof boot fits over the female assembly connector to create a tight seal, while the threaded ring screws around the inlet to prevent water damage from occurring at the connection. A gasket, compression ring, and tight screw are all included with the
Max Grip Cable: OD ø17.5mm
SS1-50 Marine Grade Inlets
These 50 amp inlets are designed to work with the older SS1-50 125V configuration. The white model is constructed of marine grade UV stabilized glass-filled polyester, while the other model is stainless steel. Both feature a watertight cap that protects the inlet when not in use as well as the rear safety enclosure.
Limited one year warranty
