Power Cords

These 30A extension cords have a rubber outer jacket that remains flexible even in cold temperatures. The L5-30 connection is commonly used with in-rack power distribution units as well as medium to large portable generators, making these cords ideal for industrial equipment or large power tools. This configuration is also used with 30A RV and marine shore power.

Approval: Plug, SJOOW: UL, C-UL

Limited one year warranty

This 20A 250V rubber extension cord features a rubber jacket that remains flexible even in cold temperatures. The L6-20 connection is commonly found on in-rack power distribution units as well as with heavy-duty 250V equipment such as welders.

Approval: Plug, SJOOW: UL, C-UL

Limited one year warranty

This extension cord has a NEMA L6-30 configuration, which is popular with industrial equipment, in-rack power distribution units, heavy-duty 240V equipment, such as welders, and many electrical vehicle chargers. The SJOOW cable is super flexible, even in colder temperatures.

Approval: Plug, SJOOW: UL, C-UL

Limited one year warranty

These heavy-duty power supply cord plugs into a NEMA 14-30 (125/250V) outlet and have a CS6364 connector for attaching to an inlet box, generator cord, or other device with a CS6365 configuration. It is commonly used with heavy equipment, generators, and power distribution centers. The rubber outer jacket remains flexible in cold temperatures while also providing resistance to oil and water.

Max Power: 7500W

Approval: Jacket STW, Connector: UL, C-UL

Limited one year warranty

This NEMA 10-30 power extension cord is available in several different lengths. This outlet style is used with older dryers and EV chargers.

Limited one year warranty

These heavy-duty power supply cord plugs into a NEMA 14-30 (125/250V) outlet and have a CS6364 connector for attaching to an inlet box, generator cord, or other device with a CS6365 configuration. It is commonly used with heavy equipment, generators, and power distribution centers.

Max Power: 7500W

Approval: Jacket STW, Connector: UL, C-UL

Limited one year warranty

This 30A generator extension cord has a threaded ring on the female connector to form a watertight seal around an inlet when securely screwed on. The male plug also has a threaded ring to connect an additional power cord or adapter. This cord is designed to work with the NEMA L14-30 Power Inlet Boxes.

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

This 50 amp generator extension cord is built to power large industrial equipment and provide emergency power to homes. Easily connect multiple power distribution units at a trade show or temporary camping locations with this heavy duty cord. It fits most CS6364 generator transfer switches as well. The male plug is the CS6365 (SS2-50P), 50A California Standard locking style, while the female connector is the CS6364, 50A California Standard locking style with center guiding pin.

This cord has a 600V rated cable that remains flexible in cold weather and provides heat resistance up to 221°F.

Limited one year warranty

*Derated to 45 Amps when the cable is longer than 50ft

These temporary power cords come in different lengths up to 100ft. They feature a L14-20 plug, commonly found on generators, and a CS6364 connector that fits most 50A power inlet boxes that are wired to a transfer switch. Heavy-duty 10 gauge wire inside the cable helps reduce line loss with longer cord lengths.

Max Power: 5000W

Approval: Plug, STW, UL & C-UL listed

Limited one year warranty

This power cord can be used to provide power from a generator to a transfer switch. It features a 4 prong, L14-30 plug and a CS-6364 female connector with the center guiding pin that connects to a power inlet box. The 600V rated jacket is durable and heat resistant up to 221°F.

Max power: 7500W

*De-rated to 25 amps when cable is longer than 50ft.

Approval:Plug, STW: UL, C-UL

Limited one year warranty

This 12 gauge extension cord is designed for contractors or typical households to provide power for devices such as a drill or saw from over 100ft away. The bright purple 300V cable stands out it in low light conditions while the female end of the power cord features a bright neon light that illuminates when the power is connected.

• Cable Features
• •100% copper 12 gauge wire
• •Bright purple cable that stands out

Approval: Plug, Connector, and SJTW: UL, C-UL

Limited one year warranty

This fully molded red generator cord feature a 4-Prong locking configuration commonly found on most medium to large size portable generators and transfer switches. The cable jacket (STW/SJTW) remains flexible in various weather conditions with heat-resistance up to 221° F. These cords are built with heavy strand 10AWG wire for limited voltage drop, which is great for contractors, mobile businesses, and home emergency power systems.

Approval: Plug, Connector, and SJTW: UL, C-UL Listed

Limited one year warranty

This NEMA L5-30 generator extension cord remains flexible in cold weather and heat resistant up to 221 Fahrenheit.

Max Power: 3750W

Approval: Plug, Connector, and STW: UL, C-UL

Limited one year warranty

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature. Optimized for 220-240 volt systems, this is a commonly used power cord in data centers for connecting PCs to power distribution units (PDUs).

Rated For: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature. Optimized for 220-240 volt systems, this is a commonly used power cord in data centers for connecting PCs to power distribution units (PDUs).

Rated For: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty