Power Cords

This power cord has an IEC C14/SHEET E inlet and an IEC C13 connector. It is optimized for data centers using 220-240 volt systems to connect PCs to Power Distribution Units (PDU). Other popular applications include usage as an extension cord with existing CPU power cords, as well as daisy chaining DMX light fixtures.

Max Power: 2300W

Limited one year warranty

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature. Optimized for 220-240 volt systems, this is a commonly used power cord in data centers for connecting PCs to power distribution units (PDUs).

Rated For: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

This C14 to C15 high temperature power cord is commonly used with kitchen appliances such as electric kettles. The male end will fit a C13 connector, but the cable has a higher temperature rating of 221°F instead of the standard 158°F for a C13 connection.

Approval: UL, C-UL

Limited one year warranty

This C20 to C19 power cord is commonly used to connect servers to Power Distribution Units (PDUs). The C20 inlet is straight while the C19 connector has a 90° downward angle.

Limited one year warranty

This CEE 7/7 Europe Schuko 2 prong plug to IEC C13 power cord is designed for computers, server rooms, and other electronic equipment. The Push Lock female connector plugs into the device easily and prevents the cord from accidentally unplugging by locking into place to provide safe, continuous power.

Countries of Use:

• •Europe

Approval:

• •Plug: European, KC, EAC
• •Connector: UL, CUL, SAA, TUV, CEC
• •Cable: European, KC, CE

Limited one year warranty

This server power cord has a European 3 pin plug (CEE 7/7 European Schuko) and an IEC C19 female connector with a left turn orientation. The cable extends 8.5ft. to provide plenty of space away from the outlet.

Approval: Plug: DEMKO, SEMKO, NEMKO, FIMKO, IMQ, GOST, Connector: VDE, H05VV-F: European
Limited one year warranty

This power cord features a 10A 250V Chinese Type I plug. The Push Lock connector has an IEC C13 configuration and easily disconnects from an inlet by pulling back on the red tabs. At 10ft. long, this cable provides plenty of room away from the outlet.

Approval: Plug & Cable-CCCs

Limited one year warranty

This 50 amp generator extension cord is built to power large industrial equipment and provide emergency power to homes. Easily connect multiple power distribution units at a trade show or temporary camping locations with this heavy duty cord. It fits most CS6364 generator transfer switches as well. The male plug is the CS6365 (SS2-50P), 50A California Standard locking style, while the female connector is the CS6364, 50A California Standard locking style with center guiding pin.

This cord has a 600V rated cable that remains flexible in cold weather and provides heat resistance up to 221°F.

Limited one year warranty

*Derated to 45 Amps when the cable is longer than 50ft

This IEC 309 to ROJ power cord is rated at 32A 200~250V and is typically used for industrial purposes. The female end has the outer jacket removed for easily wiring an assembly connector or to hard wire into equipment.

Limited one year warranty