This NEMA L14-20 rubber extension cord has a rubber outer jacket that is oil and chemical resistant as well as being flexible in subzero temperatures. Please note that this cable derates to 15A when over 50ft.
Approval: Plug, SJOOW: UL, C-UL
Limited one year warranty
Power multiple devices from a generator with one of these 20A, L14-20 cords. They split a single 20A, 120/240V outlet into four 15/20A standard household outlets.
Max Power: 5000W
Approval: Plug, Connector, SJTW: UL, C-UL
Limited one year warranty
These temporary power cords come in different lengths up to 100ft. They feature a L14-20 plug, commonly found on generators, and a CS6364 connector that fits most 50A power inlet boxes that are wired to a transfer switch. Heavy-duty 10 gauge wire inside the cable helps reduce line loss with longer cord lengths.
Max Power: 5000W
Approval: Plug, STW, UL & C-UL listed
Limited one year warranty
This 30A generator extension cord has a threaded ring on the female connector to form a watertight seal around an inlet when securely screwed on. The male plug also has a threaded ring to connect an additional power cord or adapter. This cord is designed to work with the NEMA L14-30 Power Inlet Boxes.
Approval: Plug, Connector, and STW: UL, C-UL
Limited one year warranty
This NEMA L14-30 extension cord features a rubber jacket that stays flexible in cold temperatures and provides oil and water resistance. Both the male plug and female connector are fully molded.
Approval: Plug, SJOOW: UL, C-UL
Limited one year warranty
These 30 amp multi-outlet generator cord features four 15/20A (120V) 5-15/20R outlets. Each outlet has a protective cap to cover the outlets when not in use. It plugs into a generator's L14-30 outlet and provides power for running devices such as a fridge, portable a/c, lights, etc. during a storm.
Max Power: 7500W
Approval: Plug, Connector, and STW/SJTW: UL, C-UL
Limited one year warranty
This power supply cord converts a 30A (125/250V) 4-prong NEMA L14-30 outlet into a 30A (125/250V) 4-prong NEMA 14-30 straight blade outlet. These outlets are commonly used with heavy equipment, generators, power distribution centers, dryers, stoves, and more.
Approval: STW, Connector: UL, C-UL
Limited one year warranty
This power cord can be used to provide power from a generator to a transfer switch. It features a 4 prong, L14-30 plug and a CS-6364 female connector with the center guiding pin that connects to a power inlet box. The 600V rated jacket is durable and heat resistant up to 221°F.
Max power: 7500W
*De-rated to 25 amps when cable is longer than 50ft.
Approval:Plug, STW: UL, C-UL
Limited one year warranty
These NEMA L15-20 generator extension cords have 4 prongs and are rated at 250V. Each cord comes in a bright yellow jacket for easy visibility.
Approval: Plug, Connector, and SJTW: UL, C-UL
Limited one year warranty