This PDU and UPS power supply cord is 8ft. long. It has a NEMA L6-20 plug and an IEC C19 connector that plugs into an IEC C20 inlet. This cord can be used with servers and routers needing this configuration.
Approval: Plug, Connector, and SJTW: UL, C-UL
Limited one year warranty
This NEMA L6-30 10ft. extension cord is fully molded. It can be used with 250V devices such as EV chargers, welders, power tools, and other devices. The cable comes in an attractive black finish and has a bright yellow plug and connector for easy visibility.
Limited one year warranty
This extension cord has a NEMA L6-30 configuration, which is popular with industrial equipment, in-rack power distribution units, heavy-duty 240V equipment, such as welders, and many electrical vehicle chargers. The SJOOW cable is super flexible, even in colder temperatures.
Approval: Plug, SJOOW: UL, C-UL
Limited one year warranty
This power supply cord has a NEMA L6-30 plug and the outer jacket removed on the female end of the cord for easy hard wiring or attaching an assembly connector. This configuration is popular with industrial equipment, in-rack power distribution units, heavy-duty 240V equipment, such as welders, as well as many electrical vehicle chargers.
Approval: Plug, SJTW: UL, C-UL
Limited one year warranty
This Loc-King extension cord is designed for both the typical home user or a contractor who needs power for tools at the house or garage. The 12 gauge wire provides plenty of power for running devices such as a drill or saw from over 100ft away. The Loc-King plug and connector feature locking technology to prevent accidental unplugging. The female connector features a weather tight cap for protection when not in use and a LED indicator light that illuminates when the power is connected. The cable comes in a bright yellow color that stands out it in low light conditions.
Approval: Plug, Connector, and SJTW: UL, C-UL
This 30A pigtail cord has a NEMA L5-30 female connector is angled downward at a 45° angle for strain relief. It also has a built-in LED power indicator light and a threaded ring that screws around the inlet. The supply end has the outer jacket removed by 40mm for easily wiring an assembly plug. This pigtail adapter is designed for RV power applications.
Approval: Connector, STW: UL, C-UL
Limited one year warranty
This sump pump replacement cord includes a switch feature that activates power to the female side of the piggyback plug when the water level has reached a certain point.
Approval: Plug, VCTF: PSE
Limited one year warranty
With easy setup and installation the wall mounted IEC C14 receptacle gets power from an already established IEC C14 power source allowing for a greater length between devices. The IEC C14 receptacle is already wired up by 17/3 AWG extension cable with IEC C13 female connector.
These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature.
Rated for: 2300 watts
Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European
Limited one year warranty
With easy setup and installation the wall mounted IEC C14 receptacle gets power from an already established IEC C14 power source allowing for a greater length between devices. The IEC C14 receptacle is already wired up by 17/3 AWG extension cable with IEC C13 female connector.
These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature.
Rated for: 2300 watts
Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European
Limited one year warranty