Computer / IT Power

This power tap plugs into a NEMA 5-15 outlet and splits the connection to NEMA 5-15 and IEC C13 connectors. Power a laptop or other device from the C13 connection while leaving the NEMA 5-15 connector open for charging a cellphone, tablet, etc.

Approval: UL

Limited one year warranty

These outlet splitters plug into a NEMA 5-15 standard three prong household outlet and feature three NEMA 5-15 connectors with Snap Pop Easy Release Tabs. The Snap Pop feature on the female connectors allow plugs to be easily removed by simply pressing down on the white tab on the top of each connector.

Limited one year warranty

This Y-adapter allows two laptops or other devices needing an IEC C13 connection to receive power from one NEMA 5-15 outlet. Both female connectors feature the Push Lock system that securely connect without any additional add-ons. To unplug, simply pull the red tabs to release the locking feature. It is commonly used in data centers and server rooms where running parallel power to units on one cord is needed.

Approval: Plug, SVT, SJT, and Connector: UL, C-UL

Limited one year warranty

This power tap splits a NEMA 5-15 outlet to two IEC C13 connections, allowing up to two devices to be connected. The compact design helps avoid crowding issues around the outlet.

Approval: UL

Limited one year warranty

This power splitter plugs into a NEMA 5-15 outlet and splits the connection to two IEC C13 connectors, allowing two computers or other devices to be plugged into the same outlet.

Approval: Plug, SVT 18/3, NEMA 5-15P U.S Plug to (2) IEC C13 Connector: UL, C-UL

Limited one year warranty

This 15A power tap is polarized and grounded for safety. It has a NEMA 5-15P male plug and two 5-15 female connectors. The small, compact design is for keeping appliance plugs close to the power source.

Limited one year warranty

These power cords have a NEMA 1-15P US two prong household plug and an IEC C17 female connector that is typically used with computers and power bricks for laptops. The connector has a 90° up angle for strain relief.

This server power cord features a 1-15 plug and a C17 connector with an upward angle.

Approval: Plug, SJT, and Connector: UL, C-UL

Limited one year warranty

These 1-15 power extension cords allow up to three devices to be connected to the same outlet. The protective caps can be used to cover the outlets when not in use. The NEMA 1-15 connection is the older two prong standard household non-grounded connection.

Approval: Plug, Connector, and SPT-2: UL, C-UL

Limited one year warranty

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature. Optimized for 220-240 volt systems, this is a commonly used power cord in data centers for connecting PCs to power distribution units (PDUs).

Rated For: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature. Optimized for 220-240 volt systems, this is a commonly used power cord in data centers for connecting PCs to power distribution units (PDUs).

Rated For: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature. Optimized for 220-240 volt systems, this is a commonly used power cord in data centers for connecting PCs to power distribution units (PDUs).

Rated For: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

These IEC C14 to IEC C13 Locking IT/PDU power cords come in several different lengths. The universal design attaches to most equipment without requiring any additional add-ons to keep the connection locked into place. The locking mechanism is activated after the connector has been fully pushed in while the red tabs can be pulled to release the locking feature. Optimized for 220-240 volt systems, this is a commonly used power cord in data centers for connecting PCs to power distribution units (PDUs).

Rated for: 2300 watts

Approval: Connector: UL, C-UL TUV, Plug, SJTW: UL, C-UL European

Limited one year warranty

This vertical power strip features five C13 connectors for powering multiple devices and a C14 inlet for plugging in a detachable cord. The two pre-drilled mounting tabs allow for quick and easy installation in server rooms, data centers, and other locations. It is constructed of ABS temperature resistant material and has an added two layer construction to provide extra heat resistance.

Approval: UL, C-UL, TUV, CE

Limited one year warranty