Supply Cords

Connect power from your portable generator to a transfer switch easily with this L14-30 power inlet box. Power inlet boxes are ideal for running power to critical electrical systems, while avoiding harmful exhaust fumes that a generator produces. The box is mounted outside the home / business, and wires directly to a transfer switch/box. Now when you need emergency power, just connect your generator cord to the inlet box and flip the switch to your transfer unit.

Cordset Features:

•A threaded ring on both the male plug and female connector to form a weather tight seal at the connection.

•The threaded ring on the connector side is designed to securely screw around the power inlet box to form a weather-tight connection when connected.

•A flexible weather resistant jacket to prevent damage when used over an extended period of time.

Inlet Box Features:

•Features a protective cap that creates a weather-tight seal when not in use.

•Removable box face for easy installation

•4 Knockouts @ 0.85 inches

Max Wattage: 7500W

Approval: Cordset & Inlet: UL, C-UL

Limited one year warranty

This small wiring harness features a Green Dot sealed 20amp male end with a removed outer jacket on the female end. It is commonly used for rewiring units with damaged cables or wiring a new unit altogether.

•(15.8mm long exposed copper)

Approval: Plug, SJT: UL, C-UL

Limited one year warranty

This power supply cord converts a 30A (125/250V) 4-prong NEMA L14-30 outlet into a 30A (125/250V) 4-prong NEMA 14-30 straight blade outlet. These outlets are commonly used with heavy equipment, generators, power distribution centers, dryers, stoves, and more.

Approval: STW, Connector: UL, C-UL

Limited one year warranty

This 30A pigtail cord has a NEMA L5-30 female connector is angled downward at a 45° angle for strain relief. It also has a built-in LED power indicator light and a threaded ring that screws around the inlet. The supply end has the outer jacket removed by 40mm for easily wiring an assembly plug. This pigtail adapter is designed for RV power applications.

Approval: Connector, STW: UL, C-UL

Limited one year warranty

This range / dryer replacement 4ft. power cord has a NEMA 14-50 plug and the outer jacket removed on the female end with terminal ends for easy wiring. The cord brackets are included.

Approval: Plug and SRDT: UL, C-UL

Limited one year warranty

These heavy-duty power supply cord plugs into a NEMA 14-30 (125/250V) outlet and have a CS6364 connector for attaching to an inlet box, generator cord, or other device with a CS6365 configuration. It is commonly used with heavy equipment, generators, and power distribution centers. The rubber outer jacket remains flexible in cold temperatures while also providing resistance to oil and water.

Max Power: 7500W

Approval: Jacket STW, Connector: UL, C-UL

Limited one year warranty

These heavy-duty power supply cord plugs into a NEMA 14-30 (125/250V) outlet and have a CS6364 connector for attaching to an inlet box, generator cord, or other device with a CS6365 configuration. It is commonly used with heavy equipment, generators, and power distribution centers.

Max Power: 7500W

Approval: Jacket STW, Connector: UL, C-UL

Limited one year warranty

These temporary power cords come in different lengths up to 100ft. They feature a L14-20 plug, commonly found on generators, and a CS6364 connector that fits most 50A power inlet boxes that are wired to a transfer switch. Heavy-duty 10 gauge wire inside the cable helps reduce line loss with longer cord lengths.

Max Power: 5000W

Approval: Plug, STW, UL & C-UL listed

Limited one year warranty

This power cord can be used to provide power from a generator to a transfer switch. It features a 4 prong, L14-30 plug and a CS-6364 female connector with the center guiding pin that connects to a power inlet box. The 600V rated jacket is durable and heat resistant up to 221°F.

Max power: 7500W

*De-rated to 25 amps when cable is longer than 50ft.

Approval:Plug, STW: UL, C-UL

Limited one year warranty

This hospital grade power cord features a C13 Push Lock connector that keeps it locked into place without needing any additional hardware. The red quick release tabs on the side allow the cord to be easily unplugged by pulling on them. The male plug features a comfortable finger grip design to unplug cords more effortlessly.

Approval: Plug, Connector, and SJTW: UL, C-UL

Limited one year warranty

These hospital cords are available with a Green Dot sealed male plug in a 6 or 9 o'clock position. The plug also features an easy finger grip design for better leverage while unplugging the cord.

Approval: Plug, Connector, and SJT: UL, C-UL

Limited one year warranty

These 30A power cords are designed to fit the NEMA  L5-30 locking style inlets commonly found on small to mid-size RVs, boats, and power inlet boxes. The female connector features a threaded ring to keep the connection protected from the elements as well as a LED power indicator light. The NEMA TT-30 male plug fits the 30A RV standard outlet that is also found on generators.

Approval: UL & C-UL: Plug, Connector, & STW

Limited one year warranty