Supply Cords

This power supply cord is typically used to connect CPU power supplies, computers, display monitors, scanners, printers, or HDD enclosures. It features a NEMA 5-15P male plug and an IEC C13 female connector.

28005-079: SJT Jacket

28001-096: SVT Jacket

Approval: Plug, Connector, and SVT: UL, C-UL

Limited one year warranty

This small wiring harness features a Green Dot sealed 20amp male end with a removed outer jacket on the female end. It is commonly used for rewiring units with damaged cables or wiring a new unit altogether.

•(15.8mm long exposed copper)

Approval: Plug, SJT: UL, C-UL

Limited one year warranty

This Australia Type I to IEC C13 power cord is designed for computers, server rooms, and other electronic equipment. The Push Lock female connector plugs into the device easily and prevents the cord from accidentally unplugging by locking into place to provide safe, continuous power.

Approval: Plug- SAA

Limited one year warranty

This power splitter cord has an IEC C14 male plug/inlet and splits the connection to two IEC C13 female connectors for powering two devices using the same cord.

Approval: plug, SVT 18/3, connector: UL, C-UL

Limited one year warranty

This CEE 7/7 Europe Schuko 2 prong plug to IEC C13 power cord is designed for computers, server rooms, and other electronic equipment. The Push Lock female connector plugs into the device easily and prevents the cord from accidentally unplugging by locking into place to provide safe, continuous power.

Countries of Use:

• •Europe

Approval:

• •Plug: European, KC, EAC
• •Connector: UL, CUL, SAA, TUV, CEC
• •Cable: European, KC, CE

Limited one year warranty

This server power cord has a European 3 pin plug (CEE 7/7 European Schuko) and an IEC C19 female connector with a left turn orientation. The cable extends 8.5ft. to provide plenty of space away from the outlet.

Approval: Plug: DEMKO, SEMKO, NEMKO, FIMKO, IMQ, GOST, Connector: VDE, H05VV-F: European
Limited one year warranty

This power cord features a 10A 250V Chinese Type I plug. The Push Lock connector has an IEC C13 configuration and easily disconnects from an inlet by pulling back on the red tabs. At 10ft. long, this cable provides plenty of room away from the outlet.

Approval: Plug & Cable-CCCs

Limited one year warranty

This IEC 309 to ROJ power cord is rated at 32A 200~250V and is typically used for industrial purposes. The female end has the outer jacket removed for easily wiring an assembly connector or to hard wire into equipment.

Limited one year warranty

These temporary power cords come in different lengths up to 100ft. They feature a L14-20 plug, commonly found on generators, and a CS6364 connector that fits most 50A power inlet boxes that are wired to a transfer switch. Heavy-duty 10 gauge wire inside the cable helps reduce line loss with longer cord lengths.

Max Power: 5000W

Approval: Plug, STW, UL & C-UL listed

Limited one year warranty

This power supply cord converts a 30A (125/250V) 4-prong NEMA L14-30 outlet into a 30A (125/250V) 4-prong NEMA 14-30 straight blade outlet. These outlets are commonly used with heavy equipment, generators, power distribution centers, dryers, stoves, and more.

Approval: STW, Connector: UL, C-UL

Limited one year warranty

This power cord can be used to provide power from a generator to a transfer switch. It features a 4 prong, L14-30 plug and a CS-6364 female connector with the center guiding pin that connects to a power inlet box. The 600V rated jacket is durable and heat resistant up to 221°F.

Max power: 7500W

*De-rated to 25 amps when cable is longer than 50ft.

Approval:Plug, STW: UL, C-UL

Limited one year warranty

This locking power cord features a molded L5-20P plug. The equipment end has the removed outer jacket for easy hard wiring or attaching an assembly connector for a custom cord.

Approval: Plug, SJT: UL, C-UL

Limited one year warranty

This fully molded generator cord features a clear blue connector with a built-in neon light that glows when the power is connected. This power cord utilizes the 3-prong, L5-30 locking outlet commonly found on generators and splits it into three 15A standard household outlets for plugging multiple devices in at the same time.

Approval: Plug, SJTW: UL, C-UL

Limited one year warranty

These temporary power cords feature a L5-30 plug, commonly found on generators, and a CS6364 connector that fits most 50A power inlet boxes that are wired to a transfer switch. Heavy-duty 10 gauge wire inside the cable helps reduce line loss with longer cord lengths.

Max power: 37500W

Approval:Plug, STW: UL, C-UL

Limited one year warranty

This PDU and UPS power supply cord is 8ft. long. It has a NEMA L6-20 plug and an IEC C19 connector that plugs into an IEC C20 inlet. This cord can be used with servers and routers needing this configuration.

Approval: Plug, Connector, and SJTW: UL, C-UL

Limited one year warranty