Supply Cords

This power supply cord converts a 30A (125/250V) 4-prong NEMA L14-30 outlet into a 30A (125/250V) 4-prong NEMA 14-30 straight blade outlet. These outlets are commonly used with heavy equipment, generators, power distribution centers, dryers, stoves, and more.

Approval: STW, Connector: UL, C-UL

Limited one year warranty

This power cord can be used to provide power from a generator to a transfer switch. It features a 4 prong, L14-30 plug and a CS-6364 female connector with the center guiding pin that connects to a power inlet box. The 600V rated jacket is durable and heat resistant up to 221°F.

Max power: 7500W

*De-rated to 25 amps when cable is longer than 50ft.

Approval:Plug, STW: UL, C-UL

Limited one year warranty

This locking power cord features a molded L5-20P plug. The equipment end has the removed outer jacket for easy hard wiring or attaching an assembly connector for a custom cord.

Approval: Plug, SJT: UL, C-UL

Limited one year warranty

This fully molded generator cord features a clear blue connector with a built-in neon light that glows when the power is connected. This power cord utilizes the 3-prong, L5-30 locking outlet commonly found on generators and splits it into three 15A standard household outlets for plugging multiple devices in at the same time.

Approval: Plug, SJTW: UL, C-UL

Limited one year warranty

These temporary power cords feature a L5-30 plug, commonly found on generators, and a CS6364 connector that fits most 50A power inlet boxes that are wired to a transfer switch. Heavy-duty 10 gauge wire inside the cable helps reduce line loss with longer cord lengths.

Max power: 37500W

Approval:Plug, STW: UL, C-UL

Limited one year warranty

This PDU and UPS power supply cord is 8ft. long. It has a NEMA L6-20 plug and an IEC C19 connector that plugs into an IEC C20 inlet. This cord can be used with servers and routers needing this configuration.

Approval: Plug, Connector, and SJTW: UL, C-UL

Limited one year warranty

This power supply cord has a NEMA L6-30 plug and the outer jacket removed on the female end of the cord for easy hard wiring or attaching an assembly connector. This configuration is popular with industrial equipment, in-rack power distribution units, heavy-duty 240V equipment, such as welders, as well as many electrical vehicle chargers.

Approval: Plug, SJTW: UL, C-UL

Limited one year warranty

This 30A pigtail cord has a NEMA L5-30 female connector is angled downward at a 45° angle for strain relief. It also has a built-in LED power indicator light and a threaded ring that screws around the inlet. The supply end has the outer jacket removed by 40mm for easily wiring an assembly plug. This pigtail adapter is designed for RV power applications.

Approval: Connector, STW: UL, C-UL

Limited one year warranty

This sump pump replacement cord includes a switch feature that activates power to the female side of the piggyback plug when the water level has reached a certain point.

Approval: Plug, VCTF: PSE

Limited one year warranty