Wiring Devices
Female Weatherproof Boot & Ring
This weatherproof boot and ring combo is designed to work with female locking connectors that are rated for 30 amps. The included threaded ring screws around an inlet or a sealing collar on a cord to prevent water damage at the connection.
Limited one year warranty
Weatherproof 30 Amp Male Boot
50A Weatherproof Boot & Ring
50A Threaded Sealing Collar
This threaded sealing collar bridges the connection between two 50A power cords equipped with weatherproof boots and rings to provide maximum water protection. It is ideal for running multiple marine, RV, or temp power cords over extended lengths.
Limited one year warranty
L6-30P to ROJ Power Cord
This power supply cord has a NEMA L6-30 plug and the outer jacket removed on the female end of the cord for easy hard wiring or attaching an assembly connector. This configuration is popular with industrial equipment, in-rack power distribution units, heavy-duty 240V equipment, such as welders, as well as many electrical vehicle chargers.
Approval: Plug, SJTW: UL, C-UL
Limited one year warranty
L5-20P to ROJ Power Cord
This locking power cord features a molded L5-20P plug. The equipment end has the removed outer jacket for easy hard wiring or attaching an assembly connector for a custom cord.
Approval: Plug, SJT: UL, C-UL
Limited one year warranty
IEC 309 to ROJ Power Cord
This IEC 309 to ROJ power cord is rated at 32A 200~250V and is typically used for industrial purposes. The female end has the outer jacket removed for easily wiring an assembly connector or to hard wire into equipment.
Limited one year warranty
L5-30R Connector, Boot, & Ring
This 30A assembly combo replaces the L5-30R connector commonly found on RV or marine shore power cords. The weatherproof boot fits over the female assembly connector to create a tight seal, while the threaded ring screws around the inlet to prevent water damage from occurring at the connection. A gasket, compression ring, and tight screw are all included with the
Max Grip Cable: OD ø17.5mm
CS6365 Steel Encased Assembly Plug
This assembly male plug has the CS6365 configuration for temp power use. The plug is surrounded in a thin steel casing to easily fit into the outlet while also featuring a nylon body.
Approval: UL & C-UL Listed
Limited one year warranty