Wiring Devices

This 3-prong locking connector is commonly used with RV, marine, and generator applications. It can be used to replace a connector that has the NEMA L5-30R configuration. The connector is made with a black nylon body that is resistant to impact.

•Hexagonal Cable Clamp

Max Grip Cable: OD ø16.5mm

Limited one year warranty

This 30A assembly combo replaces the L5-30R connector commonly found on RV or marine shore power cords. The weatherproof boot fits over the female assembly connector to create a tight seal, while the threaded ring screws around the inlet to prevent water damage from occurring at the connection. A gasket, compression ring, and tight screw are all included with the

Max Grip Cable: OD ø17.5mm

This 3-prong NEMA L6-20P male assembly plug is rated at 20A and 250V. It comes in a yellow nylon body and includes the gasket, compression ring, and tight screw needed for wiring.

Max Grip Cable: OD: 17.5mm.

Approval: UL & C-UL

Limited one year warranty

This 20A female assembly connector is typically used for 20 amp generator cords with the L6-20 configuration. It is constructed of a durable yellow nylon body with a easy to wire design.

Bladed Grab Cord type

Limited one year warranty

This 3-prong NEMA L6-30P male assembly plug is rated at 30A and 250V. It is available in a yellow nylon body and includes the compression ring, gasket, and tight screw for easy wiring.

Max Grip Cable: OD: 17.5mm.

Approval: UL & C-UL

Limited one year warranty

This power supply cord has a NEMA L6-30 plug and the outer jacket removed on the female end of the cord for easy hard wiring or attaching an assembly connector. This configuration is popular with industrial equipment, in-rack power distribution units, heavy-duty 240V equipment, such as welders, as well as many electrical vehicle chargers.

Approval: Plug, SJTW: UL, C-UL

Limited one year warranty

This 30A 250V NEMA L6-30R locking assembly female connector has a yellow nylon body with rear cord clamp. It includes all the necessary parts for wiring including the gasket, compression ring, and tight screw. The L6-30 configuration is commonly used with in-rack Power Distribution Units (PDUs) and for heavy-duty power equipment such as welders and other industrial equipment.

Max Grip Cable: OD 17.5mm.

UL & C-UL listed

Limited one year warranty

This non-ABS metal 7 way round trailer connector is designed for semis and large trailers. It features a spring that provides strain relief to the cable for long lasting durability.

Limited one year warranty

This 30A straight blade configuration style is commonly found on power cords for generators and is the standard for 30A service at RV parks. The assembly plug features a clamp grip for easy wiring, while the right angle provides strain relief to the cord, allowing the RV pedestal to fully close.

Limited one year warranty