Wiring Devices

Need to wire a new trailer or replace an old junction box with a new one? This 7 way junction box comes ready to wire, and includes all plastic, hardware, and sealing grommets you will need.

A 7 Way system provides additional circuits for trailers with electric brakes and auxiliary lighting such as interior lights or a backup/reverse function.

CAUTION: The diagrams are instructions on how to wire a vehicle for towing with these products. Some manufactures use a different wire setup than listed, so it is very important to double check your current wiring for compatibility with this product. We recommend that you use a test light/volt meter to check the wiring before using.

Designed for tow behind RV applications, this replacement 7 way trailer socket easily connects to most existing mounting brackets. The heavy-duty impact resistant nylon socket also includes a weatherproof, insulated lid to protect the terminals from exposure to the elements when not in use. Does NOT include a mounting plate

Limited one year warranty

These breakaway switches automatically activate a trailer's brakes if the trailer disconnects from the hitch. They are constructed with a reinforced nylon case with a nylon pull pin that will not freeze up. The silver contact points will remain corrosion free ensuring positive contact. Choose from one of the several lengths available.

• Caution:
• •Removing the plunger with power to brakes could result in damaging the brakes.
• •Removing the plunger while in storage could result in corrosion of the unit points.
• •This item is designed to be used as the the breakaway device only.
• •Do not use as parking brake!

Approval: 1015-UL

Limited one year warranty

This assembly plug has an IEC C14 configuration. It can be easily wired to an existing cord and is commonly used with other power cords that have a C13 connector.

Max cable diameter: 9.88mm

Approval: UL, TUV

Limited one year warranty

This IEC C19 assembly connector can be used as a replacement or to wire on to a new power cord. It utilizes a screw grip to keep the cable it is attached to firmly in place. It is constructed of a high temperature resistant material for safety purposes.

16A International

Applicable Cable: TUV: 1.0~1.5MM²

20A North American Household

Applicable cable: UL: 16-12AWG

Limited one year warranty

This IEC C20 / SHEET I assembly male inlet can be used as a replacement or for wiring a new power cord. The screw grip helps keep the cable secure for added safety.

16A International, Applicable cable: TUV: 1.0~1.5MM²

20A North American Household, Applicable cable: 16-12AWG

Approval: TUV

Limited one year warranty

This 48" replacement cable and plunger fits into a trailer's existing breakaway switch and provides emergency power to the brakes once removed. It does not include a breakaway switch.

MAX. TRl-AXLE.

• Caution:
• •Removing the plunger with power to brakes could result in damaging the brakes.
• •Removing the plunger while in storage could result in corrosion of the unit points

This CS6364 assembly female connector can be used with large generators and construction cords that have a CS6365 plug/inlet. It is similar to the SS2-50R, but this connector includes the center guiding pin.

Approval: UL, C-UL

Limited one year warranty

This assembly male plug has the CS6365 configuration for temp power use. The plug is surrounded in a thin steel casing to easily fit into the outlet while also featuring a nylon body.

Approval: UL & C-UL Listed

Limited one year warranty