Wiring Devices

This non-ABS metal 7 way round trailer connector is designed for semis and large trailers. It features a spring that provides strain relief to the cable for long lasting durability.

Limited one year warranty

This pigtail cord has the outer jacket removed on the male supply side for easily hard wiring or attaching a plug. The connector has an easy grip handle with a LED power indicator light.

Approval: Plug and STW: UL, C-UL

Limited one year warranty

This weatherproof boot is designed to work for both 50A male plugs and female connectors to provide protection against the elements.

Limited one year warranty

This zinc ISO 7 way round trailer socket is designed for heavy-duty applications such as with semis and large trailers. A protective cap securely covers the socket when not in use.

Limited one year warranty

This 20A 125V NEMA L5-20 assembly plug is commonly used to wire an existing or new cord for a generator or other device using this configuration. It is constructed of an impact resistant nylon body and includes a gasket, compression ring, and tight screw.

Max grip Cable: OD ø17.5mm

Approval: UL, C-UL

Limited one year warranty

This pigtail cord has the outer jacket removed on the male supply side for easily hard wiring or attaching a plug. The connector has an ring handle with a LED power indicator light.

Approval: Plug and STW: UL, C-UL

Limited one year warranty

This 50A threaded ring can be attached to a weatherproof boot as a replacement if one breaks or strips. This ring is made of high impact ABS plastic and fits snugly over the weatherproof boot by using a heat gun or hair dryer to warm it up.

This NEMA 5-15/20R female connector works with most standard household cords and can be used to wire a new or rewire an existing power cord. The T-Slot design allows plugs with a NEMA 5-15P or NEMA 5-20P male plug to connect to it.

• Connector Features:
• •Straight bladed grab cord type

Max Grip Cable: OD ø9.3mm

Limited one year warranty

This 3-prong NEMA L6-20P male assembly plug is rated at 20A and 250V. It comes in a yellow nylon body and includes the gasket, compression ring, and tight screw needed for wiring.

Max Grip Cable: OD: 17.5mm.

Approval: UL & C-UL

Limited one year warranty

This sealing collar and threaded ring combo bridge the gap between two 30A power cords to prevent water damage. Another 30A power cord with a weatherproof boot and ring will fit on the other side, keeping the connection safe from the elements.

*Please note that a heat gun or similar device will be required when using as a replacement on a power cord.

This 50 Amp power cords have the outer jacket removed six inches for easy wiring, while the male 14-50 plug is fully molded with a Easy Grip handle. The jacket resists harsh weather and abrasion. It is ideal for generators, RV's, food trucks, etc. that will be powered from a 14-50 outlet.

Approval: UL & C-UL certification for: Plug & STW

Limited one year warranty

These 50 Amp power cords have the outer jacket removed six inches for easy wiring, while the male 14-50 plug is fully molded. The jacket resists harsh weather and abrasion. It is ideal for generators, RV's, food trucks, etc. that will be powered from a 14-50 outlet.

• With a ROJ on one end, it offers improved flexibility for custom wiring without the need for extra stripping.

Approval: UL & C-UL certification for: Plug & STW

Limited one year warranty

This NEMA 6-15/20R female connector works with most standard household cords and can be used to wire a new or rewire an existing power cord. The T-Slot design allows plugs with a NEMA 6-15P or NEMA 6-20P male plug to connect to it.

•Straight bladed grab cord type

•Max grip Cable: OD ø9.3mm

Limited one year warranty

These 30 amp NEMA L5-30 locking assembly plugs can be used to wire a new cord or replace a plug with the same configuration. It comes in either a black or yellow nylon body with a rear cord clamp for easy wiring.

•Bladed Grab Cord Type

Max Grip Cable: OD ø16.5mm

Limited one year warranty