Wiring Devices

This 50A threaded ring can be attached to a weatherproof boot as a replacement if one breaks or strips. This ring is made of high impact ABS plastic and fits snugly over the weatherproof boot by using a heat gun or hair dryer to warm it up.

This NEMA 5-15/20R female connector works with most standard household cords and can be used to wire a new or rewire an existing power cord. The T-Slot design allows plugs with a NEMA 5-15P or NEMA 5-20P male plug to connect to it.

• Connector Features:
• •Straight bladed grab cord type

Max Grip Cable: OD ø9.3mm

Limited one year warranty

This 3-prong NEMA L6-20P male assembly plug is rated at 20A and 250V. It comes in a yellow nylon body and includes the gasket, compression ring, and tight screw needed for wiring.

Max Grip Cable: OD: 17.5mm.

Approval: UL & C-UL

Limited one year warranty

This sealing collar and threaded ring combo bridge the gap between two 30A power cords to prevent water damage. Another 30A power cord with a weatherproof boot and ring will fit on the other side, keeping the connection safe from the elements.

*Please note that a heat gun or similar device will be required when using as a replacement on a power cord.

This 50 Amp power cords have the outer jacket removed six inches for easy wiring, while the male 14-50 plug is fully molded with a Easy Grip handle. The jacket resists harsh weather and abrasion. It is ideal for generators, RV's, food trucks, etc. that will be powered from a 14-50 outlet.

Approval: UL & C-UL certification for: Plug & STW

Limited one year warranty

These 50 Amp power cords have the outer jacket removed six inches for easy wiring, while the male 14-50 plug is fully molded. The jacket resists harsh weather and abrasion. It is ideal for generators, RV's, food trucks, etc. that will be powered from a 14-50 outlet.

Approval: UL & C-UL certification for: Plug & STW

Limited one year warranty

This NEMA 6-15/20R female connector works with most standard household cords and can be used to wire a new or rewire an existing power cord. The T-Slot design allows plugs with a NEMA 6-15P or NEMA 6-20P male plug to connect to it.

•Straight bladed grab cord type

•Max grip Cable: OD ø9.3mm

Limited one year warranty

These 30 amp NEMA L5-30 locking assembly plugs can be used to wire a new cord or replace a plug with the same configuration. It comes in either a black or yellow nylon body with a rear cord clamp for easy wiring.

•Bladed Grab Cord Type

Max Grip Cable: OD ø16.5mm

Limited one year warranty