Accessories

This threaded ring is compatible with most 30A RV and marine inlets. It fits over a weatherproof boot and screws over an inlet to provide maximum protection against the elements.

*Please note that a heat gun or similar device will be required when using as a replacement on a power cord.

This threaded sealing collar bridges the connection between two 50A power cords equipped with weatherproof boots and rings to provide maximum water protection. It is ideal for running multiple marine, RV, or temp power cords over extended lengths.

Limited one year warranty

These breakaway switches automatically activate a trailer's brakes if the trailer disconnects from the hitch. They are constructed with a reinforced nylon case with a nylon pull pin that will not freeze up. The silver contact points will remain corrosion free ensuring positive contact. Choose from one of the several lengths available.

• Caution:
• •Removing the plunger with power to brakes could result in damaging the brakes.
• •Removing the plunger while in storage could result in corrosion of the unit points.
• •This item is designed to be used as the the breakaway device only.
• •Do not use as parking brake!

Approval: 1015-UL

Limited one year warranty

This weatherproof boot and ring combo is designed to work with female locking connectors that are rated for 30 amps. The included threaded ring screws around an inlet or a sealing collar on a cord to prevent water damage at the connection.

Limited one year warranty

This 48" replacement cable and plunger fits into a trailer's existing breakaway switch and provides emergency power to the brakes once removed. It does not include a breakaway switch.

MAX. TRl-AXLE.

• Caution:
• •Removing the plunger with power to brakes could result in damaging the brakes.
• •Removing the plunger while in storage could result in corrosion of the unit points

This weatherproof boot is designed to work for both 50A male plugs and female connectors to provide protection against the elements.

Limited one year warranty

This 50A threaded ring can be attached to a weatherproof boot as a replacement if one breaks or strips. This ring is made of high impact ABS plastic and fits snugly over the weatherproof boot by using a heat gun or hair dryer to warm it up.