Recreational Vehicle Power

This 12V car charger extension cord has a coiled cable that has a working length of up to 6ft. The plug has a built-in 10A fuse and strain relief protection while the connector has a watertight cap to keep it protected when not in use.

Limited one year warranty

This 12V DC extension cable includes a built-in 10A fuse and extends an automobile's, boat's, or generator's charging port up to 10ft for powering devices. The female connector includes a watertight cap that protects it when not in use.

This trailer cord features a 7 way inline plug and a 7 Way elbow plug. Simply connect the inline plug to the truck and the inline one to the trailer. The heavy-duty 8ft. cable comes in an attractive black finish.

Limited one year warranty

This 7-way trailer extension cord attaches to existing setups. The black cable resists abrasion and hides easily. The plug features pull wings for easy removal, while the socket has a spring loaded cap that firmly grips the plug when in use. This wiring design is used in most standard RV/motor-home applications.

*Wiring instructions not included

Limited one year warranty

These pre-wired junction boxes feature a molded 7-way plug and easily connect to an existing trailer wiring system. Made of impact resistant PVC, these junction boxes are guaranteed to last harsh road conditions. Each kit includes all of the plastic hardware and sealing grommets needed. There are several different cable length options to choose from, making it easy to find the right one.

Limited one year warranty

• WARNING: It is recommended to check with the manufacturer or dealership for vehicle specific information before starting. READ all instructions carefully before attempting to wire a vehicle using these products. Follow the instructions above. Improperly wiring to the trailer/vehicle may cause electrical malfunction or other damage, which could result in property damage, personal injury or even death. Conntek is not responsible for any damages caused by incorrect wiring.

This standard black 7-way trailer cord has a removed outer jacket for custom wiring trailer applications. The cable is abrasion resistant while the plug has easy grip wings for quick removal. It is designed to work with most RV/motor-home applications.

The 7-pole connectors provide additional circuits for trailers with electric brakes and auxiliary lighting such as interior lights or a backup/reverse function.

Limited one year warranty

*Wiring instructions included

Need to wire a new trailer or replace an old junction box with a new one? This 7 way junction box comes ready to wire, and includes all plastic, hardware, and sealing grommets you will need.

 

A 7 Way system provides additional circuits for trailers with electric brakes and auxiliary lighting such as interior lights or a backup/reverse function.

 

CAUTION: The diagrams are instructions on how to wire a vehicle for towing with these products. Some manufactures use a different wire setup than listed, so it is very important to double check your current wiring for compatibility with this product. We recommend that you use a test light/volt meter to check the wiring before using.

This 50A locking assembly connector comes has a nylon body and is a grab cord type. It is similar to a CS6364 connector, but this connector does not include the center guiding pin. Use as a replacement for RV, boat, generator, or other devices. These connectors are used in many industrial applications as well.

Applicable Cable Types:

Gauge: 6/4 : Jacket types: ST, STW, STOOW, STOW, SOW, SOOW)

Gauge: 6/3 8/1: Jacket types: (ST, STW, STOOW, STOW)

Approval:UL & C-UL

Limited one year warranty

The threaded ring and sealing collar are designed for use with 50A power cords commonly used with RVs, generators, marine shore power, etc. The threaded ring is attached to either the male plug or female connector side of the cord and securely screws around the sealing collar to offer maximum protection from water damage.