Supply Cords

These pre-wired junction boxes feature a molded 7-way plug and easily connect to an existing trailer wiring system. Made of impact resistant PVC, these junction boxes are guaranteed to last harsh road conditions. Each kit includes all of the plastic hardware and sealing grommets needed. There are several different cable length options to choose from, making it easy to find the right one.

Limited one year warranty

• WARNING: It is recommended to check with the manufacturer or dealership for vehicle specific information before starting. READ all instructions carefully before attempting to wire a vehicle using these products. Follow the instructions above. Improperly wiring to the trailer/vehicle may cause electrical malfunction or other damage, which could result in property damage, personal injury or even death. Conntek is not responsible for any damages caused by incorrect wiring.

This standard black 7-way trailer cord has a removed outer jacket for custom wiring trailer applications. The cable is abrasion resistant while the plug has easy grip wings for quick removal. It is designed to work with most RV/motor-home applications.

The 7-pole connectors provide additional circuits for trailers with electric brakes and auxiliary lighting such as interior lights or a backup/reverse function.

Limited one year warranty

*Wiring instructions included

This Australia Type I to IEC C13 power cord is designed for computers, server rooms, and other electronic equipment. The Push Lock female connector plugs into the device easily and prevents the cord from accidentally unplugging by locking into place to provide safe, continuous power.

Approval: Plug- SAA

Limited one year warranty

This power splitter cord has an IEC C14 male plug/inlet and splits the connection to two IEC C13 female connectors for powering two devices using the same cord.

Approval: plug, SVT 18/3, connector: UL, C-UL

Limited one year warranty

This CEE 7/7 Europe Schuko 2 prong plug to IEC C13 power cord is designed for computers, server rooms, and other electronic equipment. The Push Lock female connector plugs into the device easily and prevents the cord from accidentally unplugging by locking into place to provide safe, continuous power.

Countries of Use:

• •Europe

Approval:

• •Plug: European, KC, EAC
• •Connector: UL, CUL, SAA, TUV, CEC
• •Cable: European, KC, CE

Limited one year warranty

This server power cord has a European 3 pin plug (CEE 7/7 European Schuko) and an IEC C19 female connector with a left turn orientation. The cable extends 8.5ft. to provide plenty of space away from the outlet.

Approval: Plug: DEMKO, SEMKO, NEMKO, FIMKO, IMQ, GOST, Connector: VDE, H05VV-F: European
Limited one year warranty

This power cord features a 10A 250V Chinese Type I plug. The Push Lock connector has an IEC C13 configuration and easily disconnects from an inlet by pulling back on the red tabs. At 10ft. long, this cable provides plenty of room away from the outlet.

Approval: Plug & Cable-CCCs

Limited one year warranty

This IEC 309 to ROJ power cord is rated at 32A 200~250V and is typically used for industrial purposes. The female end has the outer jacket removed for easily wiring an assembly connector or to hard wire into equipment.

Limited one year warranty

This IEC 309 5-pin IP67 power cord has a watertight plug and terminal ends for easy wiring. It is typically used for standard industrial purposes.

Limited one year warranty

These temporary power cords come in different lengths up to 100ft. They feature a L14-20 plug, commonly found on generators, and a CS6364 connector that fits most 50A power inlet boxes that are wired to a transfer switch. Heavy-duty 10 gauge wire inside the cable helps reduce line loss with longer cord lengths.

Max Power: 5000W

Approval: Plug, STW, UL & C-UL listed

Limited one year warranty

This power supply cord converts a 30A (125/250V) 4-prong NEMA L14-30 outlet into a 30A (125/250V) 4-prong NEMA 14-30 straight blade outlet. These outlets are commonly used with heavy equipment, generators, power distribution centers, dryers, stoves, and more.

Approval: STW, Connector: UL, C-UL

Limited one year warranty

This power cord can be used to provide power from a generator to a transfer switch. It features a 4 prong, L14-30 plug and a CS-6364 female connector with the center guiding pin that connects to a power inlet box. The 600V rated jacket is durable and heat resistant up to 221°F.

Max power: 7500W

*De-rated to 25 amps when cable is longer than 50ft.

Approval:Plug, STW: UL, C-UL

Limited one year warranty